Instruction Manual

Gamatronic Electronic Industries Ltd. User Guide
4.2 The POWER + SA Display Screen
The display screen on the POWER + SA control panel shows the current operating
mode and related critical data. There are several distinct data screens that can be
shown on the POWER + SA display screen.
4.2.1 The Main Screen
The POWER + SA Main Screen is the default display on the POWER + SA screen.
From any other screen, if the keyboard is not used for 45 seconds, the POWER + SA
returns to the Main Screen.
The Main Screen shows the UPS’s current operating mode and other critical data.
Other screens describing current operating conditions can be seen by navigating
“upwards” or “downward” with the UP/DOWN key.
The first line of the Main Screen shows whether the UPS is currently on or off. The
second line tells you the most important information about the UPS’s current status.
Most of the time it will read “NORMAL MODE”. The UPS can also automatically
transfer to:
• BATTERY MODE
• BYPASS MODE
• UPS OFF
The L1, L2, and L3 numbers in the Main Screen show the current load rate as a
percent of maximal AC load at each phase.
+
17
POWER SA User Guide (UL), Release 1.7