User Manual

Gamatronic Electronic Industries Ltd.
44
POWER
+
RM100,
3X208 V, User Guide, Release 2.7ys
LOAD LEVEL ---11:20:25---
L1: _____ 030A, 120V BATTERY: 432V
L2: ______ 024A, 120V UPS OK (ON)
L3: _______ 022A, 120V STSW OK (INV)
Figure 40: Normal display, system under load (3-phase output)
LOAD LEVEL ---11:20:25---
L1: _____ 030A, 120V BATTERY: 432V
L2: ______ 024A, 120V UPS OK (ON)
STSW OK (INV)
Figure 41: Normal display, system under load (2-phase output)
IMPORTANT
NOTE: YOUR POWER+ SYSTEM HAS BEEN DELIVERED TO YOU WITH THE OUTPUT
VOLTAGE AND FREQUENCY SET TO MATCH YOUR REQUIREMENTS. CHECK NOW
TO VERIFY THAT THESE SETTINGS ARE CORRECT.
TO SET MODULE/S FREQUENCY, SEE SECTION 8.9.2 ON PAGE 92.
TO SET MODULE/S VOLTAGE, SEE SECTION 8.9.3 ON PAGE 93.
(If the voltage and frequency settings are correct, continue with section 5.11 below.)