User Manual

Gamatronic Electronic Industries Ltd.
POWER
+
RM100,
3X208 V, User Guide, Release 2.7ys
150
9.3.7.4 SNMP security
The SNMP security screen is where you define the SNMP communities that will have access to
the Power+, and whether that access will be “read only” (requests for data – a “read-only”) or
“read-write” (includes the ability to modify G4 settings).
You also have the capability of limiting the IP addresses from which the G4 will accept SNMP
packets. If the IP address has 4 segments of zero (0.0.0.0), this means that all users in the
community will have the designated access.
Figure 304: Define SNMP permissions
9.3.7.5 SNMP trap targets
An SNMP trap is a destination to which the G4 will send alarm notifications using the SNMP
protocol. For each destination, an IP address and a port must be specified.
Figure 305: Defining SNMP trap targets