User Manual

Gamatronic Electronic Industries Ltd.
POWER
+
RM100,
3X208 V, User Guide, Release 2.7ys
132
8.15 System Controller Setup Verification
The screens described below are useful for verifying system operation after replacing a controller
module(s). Especially important are the screens shown under the General section, as shown in
Figure 278. This verification procedure is available for software versions beginning from 050106.
Figure 278: Setup verification screens
8.15.1 Setup Verification Menu
All of the functions listed below are for monitoring purposes only, except for setting the menu
language.
[3-second Esc]
1> UPSs Stat 5> Dry In/Out Stat
2> UPSs On/Off 6> Alarms Status
3> SoftWare Rev 7> Language
4> Network... 1 8> General
Figure 279: Setup verification menu