User Manual

Gamatronic Electronic Industries Ltd.

POWER

RM100,

3X208 V, User Guide, Release 2.7ys

119

8.12.3.4 Setting up the Static Switch

1. Select Static Switch Setup:

[Main Menu > SETUP > (password) > Ent > Service > Configure]

1> # OF UPSs (redundancy) 5> Dry, Alarms

2> # OF UPSs (total) 6> Calibration

3> # OF BATT 7> Parallel/StandAlone

4> Static Switch Setup 8> REM COMMAND

Figure 231: Service > Configure menu

2. Select Set mask:

[Main Menu > SETUP > (password) > Ent > Service > Configure > Static Switch Setup]

1. Set mask

2. Configure BYPASS

Figure 232: Static Switch setup menu

3. Use arrow keys to set the mask, and then press Ent:

[Main Menu > SETUP > (password) > Ent > Service > Configure > Static Switch Setup > Set

mask]

Set mask

Figure 233: Set the mask

4. Select Configure BYPASS:

[Main Menu > SETUP > (password) > Ent > Service > Configure > Static Switch Setup]

1. Set mask

2. Configure BYPASS

Figure 234: Static Switch setup menu