Owner manual

Gamatronic Electronic Industries Ltd.
POWER
+
RM
50 KVA, N.Am. Std. – User Guide, Release 1.9
159
9.3.7.4 SNMP security
The SNMP security screen is where you define the SNMP communities that will have access to
the Power+, and whether that access will be “read only” (requests for data – a “read-only”) or
“read-write” (includes the ability to modify G4 settings).
You also have the capability of limiting the IP addresses from which the G4 will accept SNMP
packets. If the IP address has 4 segments of zero (0.0.0.0), this means that all users in the
community will have the designated access.
Figure 315: Define SNMP permissions
9.3.7.5 SNMP trap targets
An SNMP trap is a destination to which the G4 will send alarm notifications using the SNMP
protocol. For each destination, an IP address and a port must be specified.
Figure 316: Defining SNMP trap targets