Owner manual

Gamatronic Electronic Industries Ltd.

POWER

50 KVA, N.Am. Std. – User Guide, Release 1.9

101

2. Select Module conf.:

[Main Menu > SETUP > (password) > Ent]

1> Alarm set 5> Time 9> Silicon

2> Module conf. 6> Site

3> Battery 7> Password #1

4> Charge 8> Service

Figure 156: Setup menu

8.9.1 Setting Number of Phases

1. Select Num of phase:

[Main Menu > SETUP > (password) > Module conf.]

1. Num of phase 5.Output Adjust

2. Module/s frequency 6.Frequency Limits

3. Module/s voltage 7.DC Calibration

4. Update Vo/Fr/ph 8.AC Calibration

Figure 157: Module Config. setup menu

8.9.2 Setting Module/s Frequency

1. Select Module/s frequency:

[Main Menu > SETUP > (password) > Module conf.]

1. Num of phase 5.Output Adjust

2. Module/s frequency 6.Frequency Limits

3. Module/s voltage 7.DC Calibration

4. Update Vo/Fr/ph 8.AC Calibration

Figure 158: Module Config. setup menu

2. Use the ▲▼arrow keys to set the module/s frequency, press Ent, and then Esc:

[Main Menu > SETUP > (password) > Module conf. > Module/s frequency]

--- SET MODULE/S FREQUENCY ---

SELECT – 1 HARD (DIP DEPEND.)

SELECT – 2 SET 50HZ (SELECTED)

SELECT – 3 SET 60HZ

Figure 159: Setting the Module/s frequency