Manual

ManualsBrandsMaxPower Corp ManualsPower suppliersFirstLine P

www.stacoenergy.com

65, 80, 100, 125, 160,

200, 250kVA

Three-Phase

Double-Conversion

On-Line UPS

FIRSTL

INE

Full

Two Year

Warranty

Up to 98% E cient

■

Lower energy costs and carbon footprint

Compact & Reliable

■

Requires either front, top or bottom access, so it can be

placed against a wall to minimize footprint

■

Cooler operation extends internal component life

AC Input Performance

■

High input power factor of 0.99

■

Low input current distortion of

■

Power walk-in function that ensures progressive rectiﬁ er start-up

IGBT and Digital Signal Processor (DSP)

■

Reduces the impact of the UPS on the local supply

■

Simpliﬁ es installation where there is limited power capacity

in the form of available electrical supply rating or generator size

Dual input

■

Main power and secondary emergency standby power increase

resilience of single or parallel system conﬁ guration

High Performance Filter

■

Protects upstream power supply sources from harmonics

and reactive power generated by the loads power

Menu Select Display

■

User friendly display is easy to see and intuitive to use

Parallel up to 8 Units

■

Provides redundancy for mission critical applications

with no additional hardware

Worldwide Service Program

■

Factory trained service personnel maximize equipment life

■

Full start-up service & preventive maintenance lowers

cost of ownership

Your tailored power solutions provider

Summary of content (8 pages)

PAGE 1
FIRSTLIN INE 65, 80, 100, 125, 160, 200, 250kVA Three-Phase Double-Conversion On-Line UPS Up to 98% Efficient ■ Lower energy costs and carbon footprint Compact & Reliable ■ ■ Requires either front, top or bottom access, so it can be placed against a wall to minimize footprint Cooler operation extends internal component life AC Input Performance ■ ■ ■ High input power factor of 0.
PAGE 2
FirstLine® P UPS Applications ■ ■ ■ ■ ■ ■ ■ ■ ■ Data Centers Computer Networks Industrial Process Manufacturing Hospitals/Medical Education/Research Laboratories, Bio-Tech Pharmaceuticals/Chemical Critical Power Management Requirements Any areas needing computer grade power and a high level of available power In the event of an AC power failure, the FirstLine® P UPS will automatically transfer to battery power and continue to provide power without any interruption for the full amount of time you select
PAGE 3
of performance levels. The UPS is compatible with capacitive loads, such as blade servers, without any reduction in active power, ranging from 0.9 lead to 0.8 lag and up to 0.8 capacitive power with a low derating equal to 15% of the active power (kW). Eﬃcient and reliable power supply for mission critical applications is guaranteed by operating in redundancy and power parallel mode with up to 8 units (N+1), and by the Dual Bus System and Dynamic Dual Bus system conﬁgurations.
PAGE 4
Electrical Specifications Electrical Data INPUT Nominal voltage Nominal voltage range without battery contribution Voltage range in battery mode Input frequency range Nominal current absorbed (480V) Maximum current absorbed at full load and battery recharging (Amps) Power factor at nominal voltage (480 V) and battery charged from 25% to 100% of the load Current Harmonic distortion (THDi) (with mains distortion <2%) • load 100% • load 75% • load 25÷50% Progressive rectiﬁer (Walk-in) Delay of Progressive star
PAGE 5
Electrical Data 65 BY-PASS Nominal voltage Nominal voltage tolerance Nominal frequency Frequency tolerance Switching time inverter-by-pass with Inverter synchronized (UPS Normal) 80 UPS Power (kVA) 125 100 160 200 250 480Vac 3-phase (with or without neutral) ± 15% (can be regulated from ± 10% to ± 25% ±20% (can be regulated from ±5% to ±25% from the control panel) from the control panel) 60 Hz ± 2% (can be regulated up to ± 6% from the control panel) Approx.
PAGE 6
Communication Option Part Numbers Description FLU-NetMan FLU-MultiCOM1 FLU-MultiCOM2 FLU-Multi-I/O FLU-AS400 FLU-Sensor NetMan Network SNMP Card Monitoring MODBUS/JBUS Card Serial/USB Card I/O Protcol Converter Card AS 400 Communication Kit Environmental Sensor Module FLU-MultiPanel Remote Monitoring Panel FLU-PowerShield FLU-PowerNetGuard FLU-I/O-Expansion Communication Software Supervisory Software Expansion Card with 6 output contacts for alarms G A 1 D 50% LOAD 75% LOAD 100% LOAD Weight (lb
PAGE 7
Communication Options FLU-NetMan SNMP Adapter (Internal Network Card, external model available) allows UPS management across a LAN using any of the main network communication protocols—TCP/IP, HTTP and network interface (SNMP). NetMan Plus enabled UPS integrate easily into medium and large sized networks and provide reliable communications between the UPS and management systems employed.
PAGE 8
Service Options With our ServiStar® program, a wide range of planned maintenance and extended service options are oﬀered to maximize equipment life and reliability of your FirstLine® UPS.