MSDS

ManualsBrandsMAXphalt ManualsKitchen3.5-Gal. Cold Mix

MATERIAL SAFETY DATA SHEET FILE NO.:

MAXphalt ASPHALT MSDS DATE: 2/05/2013

Page 1 of 6

SECTION 1: PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME: MAXphalt

SYNONYMS: ASPHALT (HOT/COLD MIX)

PRODUCT CODES: VARIOUS

MANUFACTURER: Crius Corp

ADDRESS: 601 Carlson Parkway Suite 900

Minnetonka, MN 55305

EMERGENCY PHONE: 877-251-8295

CHEMTREC PHONE:

OTHER CALLS: 952-697-2220

FAX PHONE: 952-697-2224

CHEMICAL NAME: N/A

CHEMICAL FAMILY: N/A

CHEMICAL FORMULA: N/A

PRODUCT USE: ASPHALT PAVEMENTS

SECTION 2: COMPOSITION/INFORMATION ON INGREDIENTS

INGREDIENT:

AGGREGATES (LIMESTONE, GRAVEL, SLAG, NATURAL SAND, LIMESTONE SAND AND RECYCLED

ASPHALT).

LIQUID ASPHALT .

CAS NO. % WT % VOL

UNKNOWN AGGREGATES 91 - 98

8052-42-4 LIQUID ASPHALT 2 - 9

SARA 313 REPORTABLE: NO

OSHA PEL ppm mg/m3

AGGREGATES N/A N/A

LIQUID ASPHALT N/A N/A

ACGIH TLV ppm mg/m3

AGGREGATES N/A N/A

LIQUID ASPHALT 5

SECTION 3: HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW:

ROUTES OF ENTRY: SKIN, INHALATION AND INGESTION.

Summary of content (6 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET FILE NO.
PAGE 2
MATERIAL SAFETY DATA SHEET FILE NO.: MAXphalt ASPHALT MSDS DATE: 2/05/2013 POTENTIAL HEALTH EFFECTS EYES: IRRITATION, REDNESS. SKIN: IRRITATION. MOLTEN MATERIAL CAN BURN. INGESTION: GASTROINTESTIAL IRRITATION , NAUSIA, VOMITING, DIARRHEA. INHALATION: INFLAMMATION OF LINING TISSUE. ACUTE HEALTH HAZARDS: CHRONIC HEALTH HAZARDS: UNKNOWN.
PAGE 3
MATERIAL SAFETY DATA SHEET FILE NO.: MAXphalt ASPHALT MSDS DATE: 2/05/2013 EXTINGUISHING MEDIA: SPECIAL FIRE FIGHTING PROCEDURES: REGULAR FOAM, CARBON DIOXIDE, DRY CHEMICAL. UNUSUAL FIRE AND EXPLOSION HAZARDS: NEVER USE WELDING OR CUTTING TORCH ON OR NEAR PRODUCT. HAZARDOUS DECOMPOSITION PRODUCTS: MAY FORM CARBON MONOXIDE, CARDON DIOXIDE, SULFUR OXIDES, HYDROGEN SULFIDE AND VARIOUS HYDROCARBONS.
PAGE 4
MATERIAL SAFETY DATA SHEET FILE NO.: MAXphalt ASPHALT MSDS DATE: 2/05/2013 pH AS SUPPLIED: UNKNOWN pH (Other): UNKNOWN BOILING POINT: F: N/A C: N/A MELTING POINT: F: N/A C: N/A FREEZING POINT: F: N/A C: N/A VAPOR PRESSURE (mmHg): F: UNKNOWN C: UNKNOWN VAPOR DENSITY (AIR = 1): F: UNKNOWN C: UNKNOWN SPECIFIC GRAVITY (H2O = 1): @ 77 F = 2.300 – 2.700 VAPORATION RATE: BASIS (=1): UNKNOWN SOLUBILITY IN WATER: N/A PERCENT SOLIDS BY WEIGHT: 91 - 98 PERCENT VOLATILE BY WT/ BY VOL @ 77 F: < 1.
PAGE 5
MATERIAL SAFETY DATA SHEET FILE NO.: MAXphalt ASPHALT MSDS DATE: 2/05/2013 SECTION 10: STABILITY AND REACTIVITY STABILITY: STABLE INCOMPATIBILITY (MATERIAL TO AVOID): STRONG OXIDIZING AGENTS, WATER HAZARDOUS DECOMPOSITION OR BY-PRODUCTS: MAY FORM CARBON DIOXIDE, CARBON MONOXIDE, HYDROGEN SULFIDE, SULFUR OXIDES AND VARIOUS HYDROCARBONS. HAZARDOUS POLYMERIZATION: WILL NOT UNDERGO HAZARDOUS PLOYMERIZATION.
PAGE 6
MATERIAL SAFETY DATA SHEET FILE NO.: MAXphalt ASPHALT MSDS DATE: 2/05/2013 ID NUMBER: PACKING GROUP: LABEL STATEMENTS: OTHER AGENCIES: N/A SECTION 15: REGULATORY INFORMATION U.S. FEDERAL REGULATIONS TSCA (TOXIC SUBSTANCE CONTROL ACT): NONE CERCLA (COMPREHENSIVE RESPONSE COMPENSATION, AND LIABILITY ACT): 40 CFR 302.4(a): NONE SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT): 40 CFR 372.65: NONE 311/312 HAZARD CATEGORIES: 40 CFR 370.