Instruction Manual
PARKING AIR HEATER
25
Fig.21
5.5.4 High temperature exhaust pipe
When the heater is running, the surface of the exhaust
pipe will reach a high temperature. Ensure that this pipe
is installed far away from plastic components or other
objects with the poor thermal resistance on the vehicle
body. The exhaust pipe shall be properly mounted, with
its vent pointed downwards and perpendicular to the
road, at an angle of 90°±10° (see Fig. 21). To maintain
the correct angle, the exhaust pipe fixing clamp shall be
mounted within 150 mm of the pipe end.
5.5.5 Protective cover
If the exhaust pipe section installed within the vehicle
may be touched by an occupant, a protective cover must
be installed to prevent human contact and skin burns.
The exhaust wrap tape provided can withstand high
temperatures, up to about 500 ºC.
please wear safety gloves while wrapping the exhaust pipe.
All types of combustion produce high temperatures
and toxic exhaust fumes; this is the reason the exhaust
system must be installed strictly according to these
instructions.
Do not perform any work on the exhaust system while the
heater is working.
Before working on the exhaust system, first switch the heater off,
wait until all parts have cooled down completely, and wear
safety gloves if necessary.
Do not inhale the exhaust fumes.
The manufacture disclaims any liability for consequences
resulting from failure to install the device in accordance with the
requirements of this manual.
Risk of injuries and burns!
CAUTION
10°
10°
USAGE
06
1 2
3 4
5
17
16
12
10
9
8
7
6
11
13
14
15
PARKING AIR HEATER
26
1. On/off key
2. Up key
3. OK key
4. Down key
5. Settings key
6. Blue-tooth symbol
7. Plateau symbol
8. Altitude display
9. Low oil symbol (Optional)
10. Under-voltage symbol
1 1. Parameter display
12. Device operating
13. Settings Symbol
14. Time symbol
15. Fuel pump symbol
16. Glow plug symbol
17. Power level display
Fig.22
6.1 Functions
6.1.1 LCD control panel
The LCD display shows altitude, voltage, fan mode, fan in operation,
fuel pump and glow plug icons (during operation), fan speed, fuel
pump speed, housing temperature, etc.