Specifications

92 MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
Figure 5-107 Figure 5-108
13) Now tilt the alluminum inner chassis lid into a vertical orientation so as to facititate access to the
motherboard. There are two screws on either side of the cooling fan assembly. Use a Phillips #2
screwdriver to loosen these captured screws (Figures 5-107 and 5-108).
Figure 5-109 Figure 5-110
Figure 5-111 Figure 5-112
14) Gently lift the cooling fan assembly away from the chassis as illustrated in Figure 5-109.
15) Each fan has its own power connector that is attached to the main motherboard. Disconnect the
power connector associated with the CPU fan (Figure 5-110).
16) Figures 5-111 and 5-112 illustrate the removal of the second CPU Fan Assembly.