Specifications

52 MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
Figure 4-75 Figure 4-76
4) Remove the main power connector as illustrated in Figure 4-76 (release the latch with your finger
or thumb nail while pulling ion the cable).
5) Remove the CD/Audio cable as illustrated in Figure 4-77.
Figure 4-77 Figure 4-78
6) Use a Philips #1 screwdriver to remove the two screws attaching the CD/DVD backplane to the
main chassis as illustrated in Figure 5-78.
7) Gently remove the CD/DVD backplane as illustrated in Figure 4-79.
8) Present the replacement CD/DVD backplane supplied by MaxVision support to the inner chassis
and perform the steps described above in reverse order.
Note: If the replacement CD/DVD backplane does not come equipped with a protective (insulating)
Mylar cover, remove this piece from your original backplane and reattach it to the new backplane.