Specifications

48 MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
5) Use an Allen key/tool to remove the screw attaching the power distribution assembly to the power
supply unit (Figure 4-58).
6) Use a Phillips #1 screwdriver to remove the two 4-40 screws attaching the power distribution
assembly to the side of the inner chassis (Figures 4-59).
Figure 4-59 Figure 4-60
7) Gently remove the input power connector to the power distribution board (note the latch on the
back side of the connector) as shown in Figure 4-60.
8) Gently remove the display power cable from the power distribution board (Figures 4-61 and 4-62)
Cut all cable ties holding the cables to the aluminum cable guide bracket.
Figure 4-61 Figure 4-62
9) Disconnect the right speaker cable from the power distribution board as illustrated in Figures 4-63
and 4-64.