Specifications

42 MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
Figure 4-38 Figure 4-39
7) Use a Phillips #2 screwdriver to remove the four black countersunk screws holding the screen
assembly to the chassis – two on the top (Figure 4-40) and one on each side (Figure 4-41 and
Figure 4-42).
Figure 4-40 Figure 4-41
8) Observe that the monitor assemble is hinged. Gently lift the display on the side opposite the
hinge (Figure 4-13) until it is in its fully open position.
Figure 4-42 Figure 4-43