Specifications

38 MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
Figure 4-20 Figure 4-21
13) Carefully cut the cable ties as illustrated in (Figure 4-21).
14) Gently lift the monitor power and data cables out of the slot as illustrated in (Figure 4-22).
Figure 4-22
15) Place the monitor power and data cables inside the chassis out of the way while you close the
display and remove the four screws – two on each side – holding the LCD panel to the main
monitor display assembly (Figures 4-23 and 4-24).
Figure 4-23 Figure 4-24