Specifications

MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide 29
Figure 3-67 Figure 3-68
32) Click the Proceed button to initiate the restoration, at which time you will be presented with the
Operation Progress dialog (Figure 3-68), which will reflect the status of the restoration. (In the
case of a multi-DVD image, the system will inform you as and when to insert subsequent
DVDs).
33) Once the restoration process has been completed, eject the DVD from the CD/DVD drive,
power-down the system by holding the Soft-Power button on top of the center display for
approximately five seconds, and then power-up the machine using the Soft Power button to
boot-up into Windows.
Note: Once you have re-loaded the original MaxVision-supplied image, you will also have to re-
run the initialization procedures – including re-activating/re-registering your OS license – as
described earlier in this manual.
34) After the system has booted up into Windows (and you've re-run the initialization procedures as
noted above), right-click on the My Computer icon and then select the Manage option. In the
ensuing Computer Management dialog, click on the Disk Management item (Figure 3-69).
35) Right-mouse-click in the Unallocated area and select the New Partition item in order to be
presented with the New Partition Wizard as shown in Figure 3-70.
36) Click the Next button, then select the Perform a Quick Format option (ensure the File System
type is set to NTFS), and then click the OK button. The Computer Management window will
reflect your newly formatted partition (Figure 3-71).