Specifications

MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide 27
21) Click the Recovery item to be presented with the first page from the Restore Data Wizard
(Figure 3-58).
22) Click the Next button to be presented with the Archive Selection screen (Figure 3-59).
Figure 3-59
Figure 3-60
23) Ensure that the CD Drive item in the left-hand selection pane is expanded (if not, click the '+'
icon next to this item) and then use the mouse to click on the image (*.tib) file you will see there
(Figure 3-59).
Note: In the case of a multi-CD/DVD image set, the system will present you with a message
saying that this is not the last created volume in the archive and requesting you to insert the
last created volume. In this case, replace the current CD/DVD with the last disk from the set,
click on the *.tib file on this disk, and proceed to point 24 (at some stage you will be prompted
to return to the first disk).
24) Click the Next button to be presented with the Restoration Type Selection page (Figure 3-60).
25) Select the Restore Disks or Partition item and then click the Next button to be presented with
the Partition or Disk to Restore page (Figure 3-61).
Figure 3-61
Figure 3-62
26) Select the NTFS (C) option (a tick-mark indicates that the option has been selected) and then
click the NEXT button to be presented with the Restored Partition Location page (Figure 3-62).