Specifications

16 MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
24) Click the Next button to be presented with the Select Volume Type screen. Click the Simple
option as shown in Figure 3-29.
Figure 3-29 Figure 3-30
25) Click the Next button to be presented with the Select Disk screen. Ensure that the Disk 1
item is selected and appears in the Selected column on the right-hand side of the dialog as
shown in Figure 3-30.
26) Click the Next button to be presented with the Assign Drive Letter or Path screen. Ensure
that the Assign the Following Drive Letter item is selected and accept the default letter
presented by the system (or enter a different letter if you require) as shown in Figure 3-31.
Figure 3-31 Figure 3-32
27) Click the Next button to be presented with the Format Volume screen. Click the Format this
volume with the following settings item as shown in Figure 3-32. Ensure that the settings
are File system = NTFS, Allocation unit size = Default, and Volume Label = user defined
(the default is "New Volume"). Also ensure that the Perform a quick format item is selected.
28) Click the Next button to be presented with the Completing the New Volume Wizard screen
as shown in Figure 3-33.
29) Click the Finish button to perform all of the operations and exit the wizard.
30) Observe that the Disk Management area of the Computer Management dialog now
shows Disk 1 as being Dynamic, Online, and Healthy as illustrated in Figure 3-34.