Specifications

14 MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
Figure 3-26. Disk 1 is – as yet - unallocated
Note: In the case of the system used in this example, the system disk was 120 GB in size, while the
three data disks used to form the RAID array were each 400 GB in size.
Observe in Figure 3-26 that Disk 1 is shown as being approximately 800 GB in size, where 800 GB
equates to 2/3 of the 3 x 400 GB capacity of the data disks (the remaining 400 GB is used to provide
the RAID 5 redundancy).
22) Now, right-click on the Disk 1 item in the lower-right-hand portion of the screen, and then select
the New Volume option from the ensuing pop-up menu as shown in Figure 3-27.