Specifications

MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide 11
Figure 3-16 Figure 3-17
10) Use the up/down arrow keys to highlight the StorSave Profile item, and then press the <Enter>
key to access an associated pop-up dialog (Figure 3-17).
11) Use the up/down arrow keys to highlight the Protection option, and then press the <Enter> key
to select this option.
12) Use the up/down/right/left arrow keys to highlight the OK item (Figure 3-18) and then press the
<Enter> key to save your changes.
Figure 3-18 Figure 3-19
13) You will be presented with a warning dialog as shown in Figure 3-19. Press the Y (yes) to allow
the write cache to be enabled (note that this mode significantly improves performance, but it can
result in a loss of data in the event of a power failure, so MaxVision STRONGLY recommends the
use of an uninterruptible power supply (UPS) with your system).
14) At this point, you will be presented with a summary description of the RAID array you have
defined (Figure 3-20).
15) Press the <F8> key to request that your array be established and to exit the 3ware BIOS
setup utility.