Specifications

10 MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
2) Press any key to continue, which will take you fully into the 3ware BIOS Manager. Observe that
the Create Unit option is selected by default. Use <Alt-A> to select all of the drives; asterisk "*"
characters appear to the left of each drive's port number to indicate that the drive has indeed
been selected (Figure 3-12)
Figure 3-12 Figure 3-13
3) Ensure that the Create Unit item is still selected (the white box shown to the bottom left of the
screen in Figure 2-12), and then press the <Enter> key to invoke the Create Disk Array screen
(Figure 3-13).
4) Use the up/down arrow keys to highlight the RAID Configuration item, and then press the
<Enter> key to access an associated pop-up dialog (Figure 3-14).
5) Use the up/down arrow keys to highlight the RAID 5 option, and then press the <Enter> key to
select this option.
Figure 3-14 Figure 3-15
6) Use the up/down arrow keys to highlight the Stripe Size item, and then press the <Enter> key to
access an associated pop-up dialog (Figure 3-15).
7) Use the up/down arrow keys to highlight the 256 KB option, and then press the <Enter> key to
select this option.
8) Use the up/down arrow keys to highlight the Write Cache Setting item, and then press the
<Enter> key to access an associated pop-up dialog (Figure 3-16).
9) Use the up/down arrow keys to highlight the Enabled option, and then press the <Enter> key to
select this option.