Specifications

MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide 9
5) Following acceptance of the license agreement, you may be presented with the operating
system's standard Welcome to New Connection Wizard dialog. In this case, use this dialog to
setup your network connection.
6) Following this wizard, 3ware's 3DM 2 software will be installed (when prompted to do so, allow
the installation script to place a 3DM 2 icon on your desktop).
Figure 3-9
Building a New 3ware RAID 5 Array from Scratch
The discussions in this section assume that you have an existing system disk and – for one reason or
another – have installed three new/empty data disks.
1) Start to power-up the system. When you see the BIOS message "<Alt-3> to access 3ware BIOS
Manager" (Figure 2-10) press and hold the <ALT> (alternate) key and – while still holding this key
– press the number "3" key. This will invoke the 3ware BIOS manager; in most cases, you will be
presented with a warning screen as shown in Figure 3-11.
Figure 3-10 Figure 3-11