Specifications

MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide 7
Figure 3-3
Figure 3-4
2) In order to access the external video source, press the Menu button in the controls mounted on
the top of that display (Figure 3-2), and then use the left/right arrow buttons on this control panel
to access the Picture-in-Picture dialog (Figure 3-5)
Figure 3-5 Figure 3-6
3) Use this dialog to turn the Picture-and-Picture window On/Off and to specify characteristics such
as the size and position of the Picture-and-Picture window (located in the lower right-hand corner
of the screen in Figures 3-5 and 3-6.)
Note: The video source and the Picture-in-Picture window must be set to the same resolution,
which must be less-than or equal-to 1024 x 768.