Specifications

110 MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
Figure A-3
Figure A-4
Creating Your Own Image
This scenario assumes that you have added new applications, loaded or created new datasets, and
generally configured and customized your MaxVision system the way you like it. At this stage,
before you deploy the system, it is strongly recommended that you use the Acronis True Image
application to create an image of the system. Similarly, as you add additional applications or
generate additional datasets, it is strongly recommended that you create periodic backup images.
This greatly facilitates your ability to return the system to a “known good state” should any problems
arise (such as a virus attack or a hard drive failure) at some stage in the future.
For the purposes of this example, we will assume that you are writing your image to CD media (as
opposed to DVD), and that the image will occupy two CDs.
1) Power-down the system.
2) In this case you will need to create your own Acronis Recovery bootable DVD media from the
Acronis Windows application.
3) Ensure that the bootable recovery DVD supplied in the accessory pack is in the system's
CD/DVD drive. In the case of a multiple DVD image, ensure Disk #1 is in the drive.
4) Power-up the system. This will automatically launch the Acronis application as shown in Figure A5.
Use the mouse to select the Acronis item as shown in Figure A-5.
Figure A-5
Figure A-6