Specifications

108 MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
2) Take the TeraPac 3 data/control cable marked disks 4-7 and plug one end into the lower
connector on the MaxPac system as illustrated in Figure 7-4 (this connector will also be
annotated disks 4-7).
3) Plug the other ends of these data/control cables into the correspondingly labeled connectors on
the TeraPac 3 unit as illustrated in Figure 7-5 (the disks 0-3 connector is located on the right-
hand-side of the back face of the unit – this is the connector being pointed to in Figure 7-5).
4) Refer to the TeraPac 3 User Operation and Maintenance Guide for more details on the RAID
setup of the TeraPac 3 connection to the MaxPac8230.
Figure 7-5