Specifications

100 MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
Figure 6-9 Figure 6-10
Figure 6-11 Figure 6-12
8) The system's main power supply is already equipped as standard with a custom cable that is to
be connected to the UPS. This cable is used both to charge the UPS and to withdraw power form
the UPS. Due to the fact that this cable supplies high voltages, it has a protective cap. Remove
this protective cap as illustrated in Figure 6-13.
Figure 6-13 Figure 6-14
9) Connect the cables from the UPS and the system's main power supply as illustrated in Figure 6-14.
10) Gently spread the wires exiting the UPS as illustrated in Figure 6-15 so as to make them "flat"
such that they won't prevent the lid from closing completely.