Specifications

MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide 99
4) Remove the Uninterruptible Power Supply (UPS) from its shipping box and place it on the table
near the system (Figure 6-5).
Figure 6-5 Figure 6-6
5) During shipping, the cable linking the battery to the UPS controller will be disconnected for safety
reasons. Connect these two cables as illustrated in Figure 6-6.
6) Gently insert the UPS into the chassis as illustrated in Figures 6-7 and 6-8.
Figure 6-7 Figure 6-8
7) Use a Philips #1 screwdriver to secure the UPS using the four screws supplied as part of the UPS
kit (Figures 6-9 through 6-12). (Do not use the two screws you removed from the system in step
(2) because these may not be quite long enough to accommodate the extra thickness of the UPS
frame.