Specifications

94 MaxPac Single/Dual/Triple-Screen 8230 Training and Maintenance Guide
Figure 5-119 Figure 5-120
19) Remove the shadow box as shown in Figure 5-119.
20) Disconnect the EPS12V 4-pin and EPS12V 8-pin (4 x 2) power connectors from the motherboard.
Pull the connector up while using a flat-blade screwdriver to push the top of the release catch
(facing the interior of the chassis) into the body of the connector (Figures 5-120 and 5-121).
Figure 5-121 Figure 5-122
21) Disconnect the ATX 24-pin power connector from the motherboard. Pull the connector up while
using a flat-blade screwdriver to push the top of the release catch (facing the bottom of the
chassis) into the body of the connector (Figures 5-122).
22) Remove the audio-out cable that normally connects between the motherboard to the power
distribution board (disconnect this cable from the motherboard) as shown in Figure 5-123.
Observe the polarity of this connection.