Specifications

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
32
PATENTS PENDING
4. Adjust the Inboard Rollstop land-
ing position on the Threshold Plate,
by turning adjustment screw (FIG.
32-1B and 32-2). Turn screw
1/16 or 1/8 turn after you lower
Platform below fl oor level and then
raise it back to fl oor level. At fl oor
level, the Inboard Rollstop should
land and line up as shown in (FIG.
31-2B).
LOWERING SWITCH ADJUSTMENT SCREW
FIG. 32-1B
ADJUSTMENT
SCREW
RH TOWER
(LIFT WITH LH PUMP)
FIG. 32-1A
TURNING ADJUSTMENT SCREW
FIG. 32-2
CCW FOR MORE INBOARD
ROLLSTOP OVERLAP ON
THRESHOLD PLATE
CW FOR LESS INBOARD
ROLLSTOP OVERLAP ON
THRESHOLD PLATE
FOLD SWITCH & LOWERING SWITCH ADJUSTMENTS - Continued