Specifications

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
26
PATENTS PENDING
2. Use the Backup Pump (FIG. 26-
1) to raise Platform until Support
Bracket Roller is approximately 1/4”
from the bottom of the LH Lower Arm
(FIG. 26-2).
NOTE: When using the Manual Pump, fi rst
make sure the notches are lined up
vertically on tip of the Manual Back-
up Handle. Then make sure Handle
is fully engaged with Manual Pump
before you start pumping with the
Handle. See the Operation Manual
for more information on operating
the Manual Pump.
USING BACKUP PUMP
TO RAISE PLATFORM
(LH PUMP SHOWN)
FIG. 26-1
BACKUP PUMP
BACKUP PUMP
HANDLE
1/4” (APPROX.)
LH LOWER
PARALLEL ARM
SUPPORT BRACKET
ROLLER
CHECKING SMALL ROLLER CLEARANCE
(LH SIDE OF LIFT SHOWN)
FIG. 26-2
FOLD SWITCH & LOWERING SWITCH ADJUSTMENTS - Continued