Specifications

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
19
PATENTS PENDING
STOW SWITCH ADJUSTMENT
STOWED LIFT
(LIFT WITH LH PUMP)
FIG. 19-1
ILLUMINATED
POWER SWITCH
1. Make sure power switch (FIG. 19-1)
is turned on and illuminated. Stow the
Lift (FIG. 19-1).
NOTE: Do this procedure if structure of the Lift is undamaged and:
• The Platform does not stow tight
• Controller reads FOLD or UNFOLD when Platform is stowed or has settled
on the latches.
• Lift is not sending Interlock signal to vehicle.
• The STOW switch is removed & replaced.
The adjustment is done correctly if:
• Platform stows tight.
• Controller reads STOWED* when Platform is stowed or has settled on the
latches.
• Lift is sending Interlock signal to vehicle.