Specifications

11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
34
PATENTS PENDING
FLOOR POSITION ADJUSTMENT
1. Unfold the platform until the
lights illuminate at fl oor level or
raise the platform to fl oor level
as shown in FIG. 34-1A.
2. Inspect the threshold plate. The in-
board rollstop should rest on thresh-
old plate as shown in FIG. 34-1B.
INBOARD
ROLLSTOP
INBOARD ROLLSTOP RESTING
ON THRESHOLD PLATE
FIG. 34-1B
PLATFORM AT FLOOR LEVEL
(LH SIDE SHOWN)
FIG. 34-1A
THRESHOLD
PLATE
PLATFORM
LIGHT
NOTE: Do the following procedure to ensure the inboard rollstop rests on threshold
plate when platform is at vehicle fl oor level.