Installation manual

8
11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
POSITIONING LIFTGATE
The center line of the unit must be in line with the center line of the body rear door open-
ing (FIG. 8-1). The columns and main frame assembly must be touching the corner post
and sill. The temporary support angles will be resting on the fl oor and the top surface of the
main frame should be fl ush and level with the body fl oor.
CENTER LINE OF
THE UNIT.
CENTER LINE OF
BODY
CENTER LINE OF LIFTGATE MUST BE IN LINE WITH
THE CENTER OF BODY REAR DOOR OPENING
FIG. 8-1
TEMPORARY
SUPPORT AN-
GLES RESTING
ON THE FLOOR