Installation manual

46
11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
RECOMMENDED LIFTGATE POWER CONFIGURATION - Continued
3. Recommended battery box
setup for getting +24 volt dc
power from 12 volt batteries
is shown in FIG. 46-1.
NOTE: Always connect fused end of power cable to battery positive (+) terminal.
(-) BATTERY CABLE TO
COMMON GROUND
12 VOLT BATTERY CONNECTIONS FOR +24 VDC POWER
FIG. 46-1
FUSED CABLE
(SEE NOTE)
(+) BATTERY
CABLE
150 AMP CIRCUIT
BREAKER
FUSED CABLE
(SEE NOTE)
GROUND CABLE TO
PUMP BOX OR COMMON
CHASSIS GROUND