Installation manual

45
11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
2. Recommended battery box
setup for 12 volt batteries is
shown in FIG. 45-1.
RECOMMENDED LIFTGATE POWER CONFIGURATION - Continued
NOTE: Always connect fused end of power cable to battery positive (+) terminal.
12 VOLT BATTERY CONNECTIONS
FIG. 45-1
POWER CABLE
TO PUMP BOX
FUSED CABLE
(SEE NOTE)
GROUND CABLE TO
PUMP BOX OR GROUND
COMMON CHASSIS
(-) BATTERY
CABLE
150 AMP CIRCUIT
BREAKER
(+)
BATTERY
CABLES
(-) BATTERY CABLE TO
COMMON GROUND
FUSED CABLE
(SEE NOTE)