Installation manual

44
11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
1. Liftgate and additional
battery box are typically
installed on trailers as
shown in FIG. 44-1 and
on trucks as shown in
FIG. 44-2. See the fol-
lowing page for battery
and cable connections.
RECOMMENDED BATTERY BOX
INSTALLATION ON TRAILER
FIG. 44-1
RECOMMENDED BATTERY BOX
INSTALLATION ON TRUCK
FIG. 44-2
RECOMMENDED LIFTGATE POWER CONFIGURATION
NOTE: Make sure the Liftgate power unit, and all batteries on the vehicle for the
power unit, are connected correctly to a common chassis ground.
LIFTGATE
LIFTGATE
POWER UNIT
CIRCUIT
BREAKER
LIFTGATE
200 AMP FUSED
CABLE
TRACTOR BATTERIES,
TYPICAL LOCATION
LIFTGATE
POWER UNIT
BATTERY BOX,
TYPICAL LOCATION
175 AMP
FUSED CABLE
200 AMP
FUSED CABLE
TRUCK BATTERIES,
TYPICAL LOCATION
175 AMP
FUSED CABLE
CIRCUIT
BREAKER
BATTERY BOX,
TYPICAL LOCATION