Installation manual

19
11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
ATTACH OPTIONAL BATTERY BOX & FRAME TO
VEHICLE (IF EQUIPPED)
CROSS
MEMBER
CAP SCREW
WASHER
WASHER
LOCK NUT
LOCK
WASHER
TRAILER BODY
CROSS MEMBER
TRUCK BODY
CROSS MEMBER
MOUNTING
BRACKETS
BATTERY BOX
FRAME
BATTERY BOX
FRAME
BATTERY BOX
FRAME
MOUNTING
BRACKETS
MOUNTING
BRACKETS
BOLTING BRACKETS
(8 PLACES)
FIG. 19-1C
FLUSH BRACKETS
FOR TRAILERS
(8 PLACES)
FIG. 19-1B
FLUSH BRACKETS FOR TRUCKS
(8 PLACES)
FIG. 19-2
ALIGNING BATTERY
BOX FRAME
(TRAILER SHOWN)
FIG. 19-1A
1. Select holes on top of battery box
frame to align mounting brackets
fl ush to cross members. Refer
to FIGS. 19-1A & 19-1B for trail-
ers and FIG. 19-2 for trucks. Bolt
mounting brackets to battery box
frame as shown in FIG. 19-1C.
Torque each bolt and lock nut to
85-128 lb-ft.