Installation manual

15
11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
WELDING LIFTGATE TO VEHICLE - Continued
VEHICLE
BODY
1/8”
10”
10” 10”
8-1/2”
17”
28”
10” 10” 10”
1/8”
2” - 10”
17”
WELDING GUSSETS TO COLUMN
ASSEMBLY AND CORNER POST
(LH COLUMN ASSY IS SHOWN,
INSIDE UPPER FACE)
FIG. 15-1
1/8”
INSIDE OF COLUMN ASSEMBLY
Weld two 1/8” gussets to channels
and column assembly as shown in
FIG. 15-1. The channel located at
bottom of the column assembly is
gusseted in an identical manner.
Repeat for right head column assem-
bly.
WELDING MAIN FRAME TO SILL
The rear of the main frame shall be
welded to sill as illustrated in FIG.
15-2. Main frame upper side must be
fl ush to sill upper side (FIG. 15-2).
See FIG. 15-2 for welding details.
WELDING MAIN FRAME TO SILL
FIG. 15-2
MAIN FRAME