Installation manual

40
11921 Slauson Ave. Santa Fe Springs, CA. 90670 [phone] FAX [phone]
(-) BATTERY
CABLE
12 VOLT BATTERY CONNECTIONS FOR +24 VDC POWER
FIG. 40-1
150 AMP CIR-
CUIT BREAKER
(+)
BATTERY
CABLES
POWER CABLE
TO PUMP BOX
200 AMP FUSED POWER CABLE
(ONLY IF REQUIRED - SEE NOTE)
CHARGE LINE TO
TRUCK OR TRACTOR
BATTERY
150 AMP CIRCUIT BREAKER
(NEAR TRUCK OR
TRACTOR BATTERY AND/OR
NOSE OF TRAILER)
RECOMMENDED LIFTGATE POWER CONFIGURATION - Continued
4. Recommended battery box
setup for getting +24 volt dc
power from 12 volt batteries
is shown in FIG. 40-1.
NOTE: Always connect fused end of power cable to battery positive (+) terminal.