User manual
User Manual  PM200 
Page 6 
English 
PM200 Features & Description 
  2W or 25W Programmable output power 
  208 Programmable Channels 
  D-SUB 15Pin Data Connector 
  Programmable 12.5 /25 KHz Channel Spacing 
  Channel Scan 
  Priority Channel Scan 
  Look Back Channel 
  Scan List Edit 
  Priority Channel Edit 
  CTCSS/DCS/DTMF tone signalling 
  Busy Channel Lock-out 
  Mark Idle 
  Time out timer 
  Public Address 
  SELCALL 
  Stun and Revive 
  Covert Mode 
  ANI 
  SELCALL Messaging 
  Acknowledge 
  Key Lock 
  Start up Definable Logo 
  Auto Mute 
  Back Light Display 
  SMS 
  DTMF 
  HOOK Switch 
Product Description 
The PM200/250 is a fully featured mobile radio that has been developed for the European 
market. The PM200/250 is a DTMF, Selcall and SMS mobile radio with a 208-channel capability.  
The radio is programmable for output power, channel spacing, and a range of other features. 
The PM200 mobile radios are packed full of sophisticated user and system features which allow 
the radios to be tailored to meet the requirements of most radio networks today. 
All the features described are made available thanks to the latest reliable, but functionally rich, 
software that controls each PM200 mobile. This means that all features described are available 
without the need to fit expensive and time consuming option boards. 
Most of the features or options described are activated in the radio as programmable parameters; 
please contact your dealer for full details on these options. 
The PM200 is a DTMF, SECALL and SMS mobile radio with 208-channel capability. The radio is 
programmable for output power, channel spacing, and a range of features. The three buttons 
located on the bottom left-hand side of the radio under the LCD, are described as programmable. 
These three buttons (P1, P2, and P3) have a short and long press and can be used for various 
pre- programmed features, Monitor, Power H/L, Scan, DTMF, Key lock, Selcall, Scan, Public 
Address, Open Close, 1200/2400, SMS and Light. The range does conform to R+TTE Directive. 
The unit meets the R+TTE Directive ETS 300.086 2001. 
Feature List 










