Owner`s manual

8
Date: 7.5.2012
Version: 1.00
P7000-K Owner’s Manual
Slide the red heat shrink over the butt-connector on the
blue wire to cover the connection. Slide the red heat
shrink over the butt-connector on the orange wire to
cover the connection. Slide the black heat shrink over the
#10 eyelet connection. Apply heat to all three pieces of
heat shrink.
Connect the ring terminal on the blue (10) gauge wire to
the aux pin (center)
Connect the ring terminal on the white (10) gauge wire to
the ground pin. (Top)
Nose Box Installation Instructions
11.
12.
10.