User manual

Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
37
Configuration - Ethernet
If the port type is set to Ethernet, selecting the Configure button will display the following options:
IP Address: A local area network may be used to communicate with an RTU that has an Ethernet option
board. Each number in the IP address can have values in the range of 0-255. The IP address can then be
used by Toolbox to communicate with the RTU via Ethernet.
Gateway IP Addr: The IP address that allows access to the outside world for communications to an RTU on
another local area network. Each number in the Gateway IP address can have values in the range of 0-255.
Subnet Mask: Allows for detailed configuration of devices on a LAN. The default setting of 255.255.255.0 is
used in most cases. Each number in the Subnet Mask can have values in the range of 0-255.
Type: (TCPIP or UDPIP) Ethernet transport layer to use.
For more information about Ethernet ports, please see the Ethernet appendix.