User manual

Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
36
Configuration - LP-1 Integrated Radio
Superseded LP-1 hardware option. If the port type is set to LP-1 FFSK P3, selecting the Configure button
will display the following options:
Rx Frequency: (0-512,000,000 Hz) The frequency of incoming messages.
Tx Frequency: (0-512,000,000 Hz) The frequency of outgoing messages.
Min Rx Detection Level: (90-120 dB) The weakest detectable signal strength. Note: radio noise is received
between -120 to -108 dB. A setting of 90 (ie. -90dB) is recommended. The larger the number, the weaker the
signal that can be detected by the radio.
Bandwidth: (12.5, 20 or 25 kHz) Bandwidth of the radio. Standard setting is 25kHz (Wideband).
Radio Mode: (Async Mode, Sync Mode (20bpp), Sync Mode (253bpp)) Standard setting is Sync Mode
20bpp.