User manual

Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
17
Miscellaneous Data
Register Description Comments Read/Write
AI2.7 Port 3 option board
type detected
0=none, 1=serial/fibre optic/spread spectrum radio/new
pstn, 2=old pstn, 3=pline, 4=ethernet, 5=image, 6=image
(running)
Read
AI2.8 Port 4 option board
type detected
0=none, 1=serial/fibre optic/spread spectrum radio/new
pstn, 2=old pstn, 3=pline, 4=ethernet, 5=image, 6=image
(running)
Read
AO2.13 Ports 1 and 2 Data
Format
Ch 1: Port 1 stop bits, 0=one, 1=two
Ch 2: Port 1 parity, 0=even, 1=odd
Ch 3: Port 1 parity enable, 0=disable, 1=enable
Ch 4: Port 1 data bits, 0=eight, 1=seven
Ch 5-8: Port 1 new data format enable. Must write D hex
(1101 binary) to enable.
Ch 9: Port 2 stop bits, 0=one, 1=two
Ch 10: Port 2 parity, 0=even, 1=odd
Ch 11: Port 2 parity enable, 0=disable, 1=enable
Ch 12: Port 2 data bits, 0=eight, 1=seven
Ch 13-16: Port 2 new data format enable. Must write D hex
(1101 binary) to enable.
Read/Write
AO2.14 Ports 3 and 4 Data
Format
Ch 1: Port 3 stop bits, 0=one, 1=two
Ch 2: Port 3 parity, 0=even, 1=odd
Ch 3: Port 3 parity enable, 0=disable, 1=enable
Ch 4: Port 3 data bits, 0=eight, 1=seven
Ch 5-8: Port 3 new data format enable. Must write D hex
(1101 binary) to enable.
Ch 9: Port 4 stop bits, 0=one, 1=two
Ch 10: Port 4 parity, 0=even, 1=odd
Ch 11: Port 4 parity enable, 0=disable, 1=enable
Ch 12: Port 4 data bits, 0=eight, 1=seven
Ch 13-16: Port 4 new data format enable. Must write D hex
(1101 binary) to enable.
Read/Write
AI3.5 Vref ADC reference voltage. 0-32767 = 0-5V. Normally 2.5V
+2%
Read
DI3.1 Firmware error 1 = Error
Read
DI3.2 SRAM error 1 = Error
Read