User manual

Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
11
4. Port Configuration
Port 1 – RS232C
Port 2 – RS232C / RS422 / RS485
Port 3 – Plug-in option board (LP-3 only)
Port 4 – Plug-in option board
Note: All four ports are automatically configured as RS232, 9600 bps after a cold start.
Port 1 and Port 2 Configuration
Note: Pre and Post TX delays have a resolution of 10ms (eg 10ms will be 0-10ms delay).
Port 1 or 2
Module CP-x P1 or CP-x P2
Slot 0 or 1
Type PSTN, RS232, RS422 (Port 2 only), RS485 (Port 2 only)
Baud Rate
300 to 38400
Pre/Post TX
(ms)
PSTN or RS232 RS422/RS485 (Port 2 only)
0/0 50/50 (300 Baud)
30/30 (600 Baud)
20/20 (1200-38400 Baud)
Port 3 (LP-3 only) and Port 4 Configuration
Port 3 or 4
Module CP-x P3 or CP-x P4
Slot 0 or 1
Type
(depends on
installed option
board)
RS232
or PSTN
RS485
or
RS422
Line-2
Private
Line
Line-2
Analog
Radio
RS232
- Fibre
Optic
SS Radio
Baud Rate 300 to
115200
300 to
115200
1200 1200 300 to
115200
9600 (9XTend)
19200 (24XStream)
Pre/Post TX 0/0 20/20 100/50 300/100 0/0 0/0