User manual

Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
4
1. Introduction
LP-2/3 Features
Stand-alone RTU
Up to 300,000 event logs
(Can view using Toolbox 32)
Configured using Toolbox 32
software
Ready to run!
All voltages and ports
enabled by default
Two serial ports and
one (LP-2) or two (LP-3)
option ports
Very low power
consumption
Isolated serial port 2
supports RS422/RS485
Eight digital inputs
STOP
PUMP
GSM
Remotely control LP-2/3
outputs using a mobile
phone
(LP-2/3 requires a GSM)
Two digital outputs
(Relay)
TANK LEVEL
97%
Receive SMS alarms from
the LP-2/3 containing status
values and variables
(LP-2/3 requires a GSM or
PSTN modem)
Up to four digital
inputs can be
configured to operate
as transistor digital
outputs
5 /12 / 24 V Outputs for
powering I/O or an external
device
All controllable by logic
Four analog inputs
Backup
Can connect a backup
battery
(LP-2/3 provides trickle
charging)
One analog output
(LP-3 only)
Low
Low voltage shutdown
(software configurable)