User manual

Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
26
Configuration - Port List
Defines the settings for each of the 16 possible communication ports of an RTU.
The settings for each port can be configured by selecting the Port button (1 to 16).
Port: Not configurable.
Module: The module type and the port
number to configure. A PC-1 has one fixed
RS232 port and one option port. A CP-
10/11/21 or MC-10/11 has one fixed RS232
port and two option ports. An LP-1/2/3 has
two fixed serial ports and one (LP-2) or two
(LP-1/3) option ports. Possible Module
settings:
• NONE: Clears existing port configuration
• CP-x P1: CP-10/11/21 or LP-1/2/3 port 1
• CP-x P2: CP-10/11/21 or LP-1/2/3 port 2
• CP-x P3: CP-10/11/21 or LP-1/3 port 3
• CP-x P4: LP-1/2/3 port 4
• PC-1 P1, PC-1 P2:
PC-1 ports 1 and 2 respectively
• MC-x P1, MC-x P2, MC-x P3:
MC-10/11 ports 1 to 3 respectively
• RD-1, LM-1: (Superseded)
• LM-2 P1, LM-2 P2: (Superseded)
Slot: The slot address in which the module is positioned (1 to 64). It is not necessary to specify a slot
address for a CP-xx or a PC-1 module.