User manual

Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
235
• A socket that was opened for an outgoing message is automatically closed after 60 seconds (by default)
or after a configurable amount of seconds as specified by the Post Tx port setting.
• When an Ethernet port is re-connected to a network, the Ethernet port will re-initialize all it’s TCP/IP
connections and send ARP requests if it was a Primary processor port before it was disconnected.
• When all sockets are being used the Ethernet port is unable to respond to messages from new devices.
• If all sockets are being used and the RTU needs to initiate a message to a new device, it will disconnect
the socket that has been inactive the longest and reuse that socket.