User manual

Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher

Page

193

Recovering A CP-10/11 After Downloading MC Firmware

An MC-10/11 uses the same circuit board as a CP-10/11 and so it is possible to download MC firmware into

a CP module. This will change a CP-10/11 into an MC-10/11 (even though the module lens still says CP-

10/11!) To recover a CP-10/11 after downloading MC firmware, please follow the steps below.

Connect to Port 1 of the CP-

10/11 module (that contains the

MC firmware)

CP11

Port 1

Select Utilities, Advanced,

Download CPU Firmware

Set RTU address to 0 and

then select OK

When the message

“ERROR: Cannot Communicate

with RTU” appears select Ignore

Select the CP-10/11

firmware file to download and

then select OK

Note: ensure List files of type is

set to CP-10 firmware files (as

shown highlighted)