User manual

Toolbox 32 User Manual 1.47d www.cse-semaphore.com/mykingfisher
Page
174
View - Hardware Overview
Displays the modules detected on the backplane(s) and the data they contain. When an MC module is
selected, displays the MC firmware version.
If the modules have appeared in the wrong slot positions, this can be changed by powering down the RTU
and setting the DIP switches on the backplane to the correct rack number (as detailed on the backplane).
Module details can be viewed by selecting the Slot button alongside the module (1 to 64).
Note: Analog or digital outputs can be manually set from the hardware overview provided the outputs are not
being controlled by ladder logic. To manually set outputs without the RTU overwriting them, first disable
ladder logic processing using Utilities, Enable/Disable, Disable Logic Processing.